# Sections and Page Setup > Insert section breaks and set page size, margins, orientation, columns, page borders and page numbering per section in VB6, with SectionFormatDialog. - **Product:** TX Text Control ActiveX - **Section:** Documentation - **Kind:** Topic - **Path:** TX Text Control ActiveX > Document Editor > Sections and Page Setup - **5737 words** - **Web URL:** https://docs.textcontrol.com/tx-text-control-activex/document-editor/sections/ - **LLMs URL:** https://docs.textcontrol.com/tx-text-control-activex/document-editor/sections/llms.txt - **LLMs-Full URL:** https://docs.textcontrol.com/tx-text-control-activex/document-editor/sections/llms-full.txt --- A report with a landscape table in the middle, a newsletter whose second half runs in two columns or a letter whose appendix numbers its pages from 1 again: each of them needs page settings that change within one document. In `TXTextControl`, these settings belong to *sections*, parts of a document that begin with a section break and have their own page size, margins, orientation, columns, page border and headers and footers. Read on to insert section breaks, let users set up pages in the built-in dialog box and change page settings in Visual Basic 6 code, for the whole document or for one section. Sizes and distances are in *twips*, 1/1440 inch, which [Text Formatting and Views](https://docs.textcontrol.com/tx-text-control-activex/document-editor/viewing/#measure-in-twips) explains. ### How Sections Work Every document has at least one section; [SectionCount](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioncount-property/llms-full.txt) returns how many it has. Sections are numbered from the beginning to the end of the document, starting with 1, and [SectionAtInputPos](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionatinputpos-property/llms-full.txt) returns the number of the section that contains the *text input position*, the place where the caret is and typed text goes. TX Text Control ActiveX supports sections since version 14.0. Page settings are properties of `TXTextControl`, such as [PageWidth](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagewidth-property/llms-full.txt) or [Columns](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columns-property/llms-full.txt). Which part of the document they read and change is decided by one property, [SectionCurrent](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioncurrent-property/llms-full.txt): | Value of `SectionCurrent` | The page settings apply to | |---|---| | 0 | All sections of the document. This is the default. | | -1 | The section with the text input position, or all selected sections. | | 1, 2, 3 ... | The section with this number. | `SectionCurrent` controls the page size, the margins, the orientation, the columns, the page border, the page numbering, the kind of section break and the headers and footers. Because the default is 0, code that sets `PageWidth` without choosing a section first changes every section of the document. ### Insert a Section Break The [SectionInsert](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioninsert-method/llms-full.txt) method inserts a section break. Its first parameter says where the new section begins, its second parameter the text position; -1 inserts the break at the text input position: ```vbscript If Not TXTextControl1.SectionInsert(txBeginAtNewPage, -1) Then MsgBox "The section break could not be inserted." End If ``` The code works as follows: - `txBeginAtNewPage` starts the new section on the next page with a new paragraph. `txBeginAtNewLine` starts it on the next line, so that, for instance, the number of columns changes in the middle of a page. - `SectionInsert` returns True when the break has been inserted and False otherwise. The [SectionBreakKind](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionbreakkind-property/llms-full.txt) property reads or changes the kind of break an existing section starts with; `SectionCurrent` selects the section. In the document, a section break is a control character: the [PermanentControlChars](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/permanentcontrolchars-property/llms-full.txt) property shows it permanently with `txSectionBreak`. #### Insert Breaks From a Dialog Box The *TXWords* sample program, which [A Word Processor](https://docs.textcontrol.com/tx-text-control-activex/document-editor/word-processor/llms-full.txt) describes, has an **Insert Break** dialog box that it opens with **Insert** > **Break...**. Besides page, column and text wrapping breaks, it offers the section breaks **Begin at new page** and **Begin at new line**. ![The Insert Break form of the TXWords sample with the break types page, column and text wrapping break and the section break types Begin at new page and Begin at new line.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/insert-break-form.da6e7377.webp) When the user clicks **OK**, the form runs this code, shortened here, with `tx` referring to the `TXTextControl` of the document window: ```vbscript Select Case i Case 0 tx.SelText = vbFormFeed ' Page break Case 1 tx.SelText = Chr(14) ' Column break Case 2 tx.SelText = vbVerticalTab ' Text wrapping break Case 3 tx.SectionInsert txBeginAtNewPage, -1 Case 4 tx.SectionInsert txBeginAtNewLine, -1 End Select ``` The code works as follows: - The ordinary breaks are characters that [SelText](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/seltext-property/llms-full.txt) inserts at the text input position: a form feed for a page break, character 14 for a column break and a vertical tab for a text wrapping break. - The two section breaks call `SectionInsert` with the text input position, -1. TXWords enables the section break options only when the [CanDocumentFormat](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/candocumentformat-property/llms-full.txt) property is True, which it is not when [document protection](https://docs.textcontrol.com/tx-text-control-activex/document-editor/protection/llms-full.txt) forbids changing the page and section format. On the keyboard, CTRL+ENTER inserts a page break and CTRL+SHIFT+ENTER a column break, as [Keyboard Assignment](https://docs.textcontrol.com/tx-text-control-activex/reference/assignments/keyboard/llms-full.txt) lists. ### Let Users Set Up Pages The [SectionFormatDialog](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionformatdialog-method/llms-full.txt) method opens the built-in *Page Setup* dialog box. In it, users set the page attributes for the whole document or for a single section. Its parameter chooses the tab that is shown first: | Value | Tab | |---|---| | 0 | Page margins, page size and orientation. | | 1 | Headers and footers. | | 2 | Columns. | | 3 | Page borders. | The method returns True when the user has changed an attribute and False when the formatting remains unchanged. TXWords defines constants for the four values and calls the method from its menus and its toolbar: ```vbscript ' Section format dialog parameter values (tx.bas) Global Const SECTFMTDLG_PAGE = 0 Global Const SECTFMTDLG_HDRFTR = 1 Global Const SECTFMTDLG_COLUMNS = 2 Global Const SECTFMTDLG_PAGEBRD = 3 Private Sub mnuFile_PageSetup_Click() TXTextControl1.SectionFormatDialog SECTFMTDLG_PAGE End Sub Private Sub mnuFormat_Columns_Click() TXTextControl1.SectionFormatDialog SECTFMTDLG_COLUMNS End Sub ``` In TXWords, **File** > **Page Setup...** opens the first tab, and **Format** > **Headers and Footers...**, **Format** > **Columns...** and **Format** > **Page Borders...** open the other three. The toolbar buttons **Margins and Paper**, **Headers and Footers**, **Columns** and **Page Borders** do the same. ![The Margins and Paper tab of the built-in Page Setup dialog box of TXTextControl with the page margins, the paper format and size, the orientation, the section start and Apply to.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/page-setup-margins-paper.f616920e.webp) ### Set Page Size, Margins and Orientation The page size is set with [PageWidth](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagewidth-property/llms-full.txt) and [PageHeight](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageheight-property/llms-full.txt), the margins with [PageMarginL](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginl-property/llms-full.txt), [PageMarginT](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemargint-property/llms-full.txt), [PageMarginR](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginr-property/llms-full.txt) and [PageMarginB](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginb-property/llms-full.txt), and the orientation with [PageOrientation](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageorientation-property/llms-full.txt): 0 is portrait, 1 is landscape. The following code gives the whole document the US Letter size, 12,240 by 15,840 twips, with one-inch margins, and then switches the section at the text input position to landscape: ```vbscript ' All sections of the document TXTextControl1.SectionCurrent = 0 TXTextControl1.PageWidth = 12240 TXTextControl1.PageHeight = 15840 TXTextControl1.PageMarginL = 1440 TXTextControl1.PageMarginT = 1440 TXTextControl1.PageMarginR = 1440 TXTextControl1.PageMarginB = 1440 ' Only the section with the text input position TXTextControl1.SectionCurrent = -1 TXTextControl1.PageOrientation = 1 ' Back to the default TXTextControl1.SectionCurrent = 0 ``` The code works as follows: - With `SectionCurrent` set to 0, the size and the margins apply to every section. - With `SectionCurrent` set to -1, `PageOrientation` changes only the section that contains the text input position, or all selected sections. - The last line restores the default, so that later code that doesn't set `SectionCurrent` works on the whole document again. The printed area of a page is its width minus the left and right margins and its height minus the top and bottom margins. `PageWidth` and `PageHeight` must not exceed 32,767 twips, and the maximum also depends on the selected printer. The page view shows the pages with their margins and borders; [Text Formatting and Views](https://docs.textcontrol.com/tx-text-control-activex/document-editor/viewing/#page-view) describes it. #### Read Settings of Several Sections When `SectionCurrent` is 0 or -1 and the chosen sections have different settings, the properties can't return one value. They return a special value instead: | Property | Returns when the sections differ | |---|---| | `PageWidth`, `PageHeight`, `PageMarginL`, `PageMarginT`, `PageMarginR`, `PageMarginB` | -1 | | `PageOrientation`, `SectionRestartPageNumbering` | 2 | | `SectionBreakKind`, `Columns` | 0 | | `ColumnLineWidth` | -1 | | `ColumnLineColor` | &H80000000 | | `ColumnWidthsAndDistances` | An empty array | ### Arrange Text in Columns The number of page columns is an attribute of a section, so one document can mix one-column and multi-column parts, and with a section that begins at a new line, the number can change on the same page. TX Text Control ActiveX supports page columns since version 15.0. For columns of the same width, set [Columns](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columns-property/llms-full.txt) and [ColumnDistance](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columndistance-property/llms-full.txt). `TXTextControl` calculates the widths from the page width. [ColumnLineWidth](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columnlinewidth-property/llms-full.txt) and [ColumnLineColor](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columnlinecolor-property/llms-full.txt) add a dividing line between the columns: ```vbscript TXTextControl1.SectionCurrent = -1 TXTextControl1.Columns = 2 TXTextControl1.ColumnDistance = 567 ' 1 cm between the columns TXTextControl1.ColumnLineWidth = 20 ' 1 point TXTextControl1.ColumnLineColor = RGB(0, 0, 0) TXTextControl1.SectionCurrent = 0 ``` The code works as follows: - `Columns` splits the section at the text input position into two columns of the same width. - `ColumnDistance` sets the distance between them. The property is write only. - `ColumnLineWidth` draws a line of 20 twips between the columns in the RGB color that `ColumnLineColor` sets. A width of zero means no line. For columns of different widths, [ColumnWidthsAndDistances](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columnwidthsanddistances-property/llms-full.txt) takes an array of Long values. For n columns the array has 2n-1 elements: first the n column widths, then the n-1 distances. Their sum must not exceed the width of the text area, the page width without the margins. On a Letter page with one-inch margins, the text area is 9,360 twips wide: ```vbscript Dim Widths(2) As Long Widths(0) = 5760 ' width of the first column Widths(1) = 3033 ' width of the second column Widths(2) = 567 ' distance between the columns TXTextControl1.SectionCurrent = -1 TXTextControl1.ColumnWidthsAndDistances = Widths TXTextControl1.SectionCurrent = 0 ``` Read back, `ColumnWidthsAndDistances` returns an empty array when the chosen sections have different columns. For an empty array, `LBound` returns 0 and `UBound` returns -1, so check the array before you use it. Users continue the text in the next column with CTRL+SHIFT+ENTER, which inserts a column break. Users set the columns on the **Columns** tab of the **Page Setup** dialog box, which **Format** > **Columns...** opens in TXWords: ![The Columns tab of the built-in Page Setup dialog box of TXTextControl with the number of columns, their widths and spacing and the line between them.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/page-setup-columns.9bde0e51.webp) ### Add a Page Border A page border draws lines around the text of each page of a section. The [PageBorderAttribute](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageborderattribute-property/llms-full.txt) property sets it, one attribute at a time; the attribute is the parameter of the property. The following code draws a black line of one point on all four sides, 24 points from the edge of the page, on all pages of the section at the text input position except the first: ```vbscript With TXTextControl1 .SectionCurrent = -1 .PageBorderAttribute(txPageBorderLeftBorderWidth) = 20 .PageBorderAttribute(txPageBorderTopBorderWidth) = 20 .PageBorderAttribute(txPageBorderRightBorderWidth) = 20 .PageBorderAttribute(txPageBorderBottomBorderWidth) = 20 .PageBorderAttribute(txPageBorderLeftDistance) = 480 .PageBorderAttribute(txPageBorderTopDistance) = 480 .PageBorderAttribute(txPageBorderRightDistance) = 480 .PageBorderAttribute(txPageBorderBottomDistance) = 480 .PageBorderAttribute(txPageBorderMeasureFromText) = False .PageBorderAttribute(txPageBorderOmitFirstPage) = True .SectionCurrent = 0 End With ``` The code works as follows: - The `...BorderWidth` attributes set the width of each line in twips. A width of zero hides the line. - The `...Distance` attributes set the distance of each line in twips. With `txPageBorderMeasureFromText` set to False, it is measured from the edge of the page; with True, from the text. - `txPageBorderOmitFirstPage` leaves out the first page of the section. `txPageBorderFirstPageOnly` does the opposite and draws the border on the first page only. The `...BorderColor` attributes set the color of each line, and `txPageBorderSurroundHeader` and `txPageBorderSurroundFooter` decide whether the border encloses the header and the footer of the section. Page borders are available since version 17.0. Users set page borders on the **Frames** tab of the **Page Setup** dialog box, which **Format** > **Page Borders...** opens in TXWords: ![The Frames tab of the built-in Page Setup dialog box of TXTextControl with the border lines, their width and color, the distances, Measure from, Pages and the header and footer options.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/page-setup-frames.8bd83a52.webp) ### Restart Page Numbering By default, page numbers continue from one section to the next. Set [SectionRestartPageNumbering](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionrestartpagenumbering-property/llms-full.txt) to 1 to restart the numbering at the beginning of a section, or to 0 to continue it: ```vbscript TXTextControl1.SectionCurrent = 2 TXTextControl1.SectionRestartPageNumbering = 1 TXTextControl1.SectionCurrent = 0 ``` The page numbers themselves are marked text fields of the type `txFieldPageNumber` in a header or footer. [Special Types of Marked Text Fields](https://docs.textcontrol.com/tx-text-control-activex/document-editor/fields/special-types/#insert-a-page-number) shows how to insert one, and the [PageNumberDialog](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagenumberdialog-method/llms-full.txt) method opens a built-in dialog box for the formatting and numbering attributes of such a field. TXWords inserts page numbers with **Insert** > **Page Number** > **Top of Page** or **Bottom of Page**, and removes them with **Delete Page Numbers**. ![The Insert menu of the TXWords sample of version 34.0 with the Page Number submenu open: Top of Page, Bottom of Page and Delete Page Numbers.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/insert-page-number-menu.386baefb.webp) ### Headers and Footers per Section Each section can have headers and footers of its own. The header and footer members, such as [HeaderFooter](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/headerfooter-property/llms-full.txt) and [HeaderFooterSelect](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/headerfooterselect-method/llms-full.txt), work on the section that `SectionCurrent` chooses. A section that doesn't need a header or footer of its own keeps the one of the previous section: while [HeaderFooterConnectedToPrevious](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/headerfooterconnectedtoprevious-property/llms-full.txt) is True for a header or footer, it has the same contents as the one of the previous section. ```vbscript ' Give section 2 a header of its own TXTextControl1.SectionCurrent = 2 TXTextControl1.HeaderFooterConnectedToPrevious(txHeader) = False TXTextControl1.SectionCurrent = 0 ``` Users set the headers and footers of a section on the **Headers and Footers** tab of the **Page Setup** dialog box, which **Format** > **Headers and Footers...** opens in TXWords: ![The Headers and Footers tab of the built-in Page Setup dialog box of TXTextControl with Same as previous section for each header and footer, the odd and even options and the distances from the edge.](https://docs.textcontrol.com/assets/img/tx-text-control-activex/page-setup-headers-footers.5d7f6fc8.webp) [Headers and Footers](https://docs.textcontrol.com/tx-text-control-activex/document-editor/headers-footers/llms-full.txt) explains how headers and footers are added, activated and programmed. ### Select and Measure Sections and Pages A few members find out where a section or a page is and select it: - [SectionStart](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionstart-property/llms-full.txt) and [SectionLength](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionlength-property/llms-full.txt) return the one-based number of the first character of a section and its number of characters, without the section break character. - [SectionSelect](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionselect-method/llms-full.txt) selects a section and returns False when it doesn't exist. - [PageCount](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagecount-property/llms-full.txt) returns the number of pages, and [PageStart](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagestart-property/llms-full.txt), [PageLength](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagelength-property/llms-full.txt) and [PageSelect](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageselect-method/llms-full.txt) do for pages what the section members do for sections. `PageLength` includes the page break character. The following code selects the section at the text input position: ```vbscript TXTextControl1.SectionSelect TXTextControl1.SectionAtInputPos ``` ### React to Section and Page Changes Three events tell your application that the position or the format has changed: - [SectionChanged](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionchanged-event/llms-full.txt) occurs when the text input position has moved to another section. - [PageChanged](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagechanged-event/llms-full.txt) occurs when it has moved to another page. - [PageFormatChange](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageformatchange-event/llms-full.txt) occurs when the page format settings have been changed. The following handler shows the current section and the number of sections in a label named `lblSection`: ```vbscript Private Sub TXTextControl1_SectionChanged() lblSection.Caption = "Section " & TXTextControl1.SectionAtInputPos & _ " of " & TXTextControl1.SectionCount End Sub ``` A connected `TXStatusBar` shows the same information without code: its [ShowSection](https://docs.textcontrol.com/tx-text-control-activex/reference/txstatusbar/showsection-property/llms-full.txt) and [ShowSectionCounter](https://docs.textcontrol.com/tx-text-control-activex/reference/txstatusbar/showsectioncounter-property/llms-full.txt) properties display the section number and the number of sections, as they do in TXWords. ### Key Members | Member | Description | |---|---| | [SectionCurrent](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioncurrent-property/llms-full.txt) | Chooses the section, all sections or the selected sections that page settings apply to. | | [SectionInsert](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioninsert-method/llms-full.txt) | Inserts a section break that begins at a new page or a new line. | | [SectionFormatDialog](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionformatdialog-method/llms-full.txt) | Opens the built-in dialog box for page setup, headers and footers, columns and page borders. | | [PageWidth](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagewidth-property/llms-full.txt), [PageHeight](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageheight-property/llms-full.txt) | Set the page size in twips. | | [PageMarginL](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginl-property/llms-full.txt), [PageMarginT](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemargint-property/llms-full.txt), [PageMarginR](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginr-property/llms-full.txt), [PageMarginB](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pagemarginb-property/llms-full.txt) | Set the page margins. | | [PageOrientation](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageorientation-property/llms-full.txt) | Sets portrait or landscape orientation. | | [Columns](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columns-property/llms-full.txt), [ColumnWidthsAndDistances](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/columnwidthsanddistances-property/llms-full.txt) | Set page columns of the same or of different widths. | | [PageBorderAttribute](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageborderattribute-property/llms-full.txt) | Sets the lines, distances and colors of a page border. | | [SectionRestartPageNumbering](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionrestartpagenumbering-property/llms-full.txt) | Restarts or continues page numbering at a section. | | [SectionAtInputPos](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionatinputpos-property/llms-full.txt), [SectionCount](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectioncount-property/llms-full.txt) | Return the current section and the number of sections. | | [SectionChanged](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/sectionchanged-event/llms-full.txt), [PageFormatChange](https://docs.textcontrol.com/tx-text-control-activex/reference/txtextcontrol/pageformatchange-event/llms-full.txt) | Occur when the input position moves to another section and when the page format changes. | The programming category [Sections and Pages](https://docs.textcontrol.com/tx-text-control-activex/reference/categories/sections-pages/llms-full.txt) lists all members for sections and pages. ### Related Pages - [Headers and Footers](https://docs.textcontrol.com/tx-text-control-activex/document-editor/headers-footers/llms-full.txt): add, activate and program headers and footers. - [Text Formatting and Views](https://docs.textcontrol.com/tx-text-control-activex/document-editor/viewing/llms-full.txt): twips and the page view that shows pages and margins. - [A Word Processor](https://docs.textcontrol.com/tx-text-control-activex/document-editor/word-processor/llms-full.txt): the TXWords sample program with its page setup and break dialog boxes. - [Printing](https://docs.textcontrol.com/tx-text-control-activex/document-editor/printing/llms-full.txt): print the pages you have set up. - [Footnotes](https://docs.textcontrol.com/tx-text-control-activex/document-editor/footnotes/llms-full.txt): notes at the bottom of the page. - [Sections and Pages](https://docs.textcontrol.com/tx-text-control-activex/reference/categories/sections-pages/llms-full.txt): all members for sections and pages. --- ## Nearby - **Previous:** [Bulleted and Numbered Lists](https://docs.textcontrol.com/tx-text-control-activex/document-editor/lists/llms-full.txt) - **Next:** [Footnotes](https://docs.textcontrol.com/tx-text-control-activex/document-editor/footnotes/llms-full.txt)